Comments on: ipexpert section 16 issue. http://www.globalconfig.net/2008/10/10/ipexpert-section-16-issue/ Studying for Cisco Certifications Thu, 22 Jul 2010 14:31:39 +0000 hourly 1 http://wordpress.org/?v=3.0 By: Brandon http://www.globalconfig.net/2008/10/10/ipexpert-section-16-issue/comment-page-1/#comment-107 Brandon Sat, 11 Oct 2008 04:15:14 +0000 http://ccieprep.me/?p=305#comment-107 The configs here are copied right off the gear. What I should have done, and I've done in the past, is simply reboot R5. After I did that the issue cleared itself. Ugh. The configs here are copied right off the gear. What I should have done, and I’ve done in the past, is simply reboot R5. After I did that the issue cleared itself. Ugh.

]]> By: Barry http://www.globalconfig.net/2008/10/10/ipexpert-section-16-issue/comment-page-1/#comment-106 Barry Fri, 10 Oct 2008 23:32:29 +0000 http://ccieprep.me/?p=305#comment-106 I just labbed this up myself so I can be certain before I responded. The configuration you displayed is correct and is working. Did you copy and paste this into your lab devices? The only think I can think of is I typed out your config by establishing OSPF adjacencies first and then adding the virtual-links to R2 and R4. Virtual-links are quirky at times. You may want to remove them and then re-add them back to see if the error goes away. Otherwise, post up some debugs. I just labbed this up myself so I can be certain before I responded.

The configuration you displayed is correct and is working. Did you copy and paste this into your lab devices? The only think I can think of is I typed out your config by establishing OSPF adjacencies first and then adding the virtual-links to R2 and R4.

Virtual-links are quirky at times. You may want to remove them and then re-add them back to see if the error goes away. Otherwise, post up some debugs.

]]>