Sep
Configuring Auto-Registration in CUCM7
If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
With CUCM you can auto-register phones provided a simple configuration is in place. While this is not rocket science it’s nice to have the walkthrough to look back on so here it goes.
Ensure that the Cisco CallManager service is enabled by going to Cisco Unified Serviceability then select Tools>Service Activation and ensure that the Call Manager Service is enabled.
Next go to Cisco Unified CM Administration and select System>Cisco Unified CM
Once there you should notice that the default configuration has auto-registration disabled.
While auto-registration is disabled the phone will cycle through showing you that registration is denied. You can see the message in the following video:
Once this has been done the phone can be reset and should pull a number from the auto range. Fun Stuff Huh? Here is the phone registering. A little shakey but taken with my Flip. :)
Related posts:
- Convert Cisco IP-Phone from SIP to Skinny (SCCP) and reverse I have often been asked for a quick way to...
Related posts brought to you by Yet Another Related Posts Plugin.
